ZiNcGui version 1.9 (c) 2004
http://dafreak.ngemu.com
dafreak@ngemu.com

First of all thanks to the ZiNc authors.
Then to ngemu.com for the hosting :)

Screen Shots:
----------------------------------------------------------
note the images are resized to 150x112
The default shot that will be loaded is <romset>.jpg 
rollover support image formats are *.gif *.bmp *.jpg *.jpeg
place the images in a subfolder of sshot that maches the rom name

Controller:
----------------------------------------------------------
The default controller layout setting are based on game type 

For example if you edit the layout for a s11 game then click on "Set as default" it set the layout fo all s11 games ONLY
then edit the lay out for a ZN1 game the GUI creates a default config for ZN1 games.

Current cfg file is display in dialog tittle (ZiNc cfg dialog as well)
Show output (check button) display the output of ZiNc.exe


Config buttons:
----------------------------------------------------------
Run now = Save the current values to a temp file and uses it to run ZiNc
Run and Save = Save the current setting and runs ZiNc
Rescan ROM's = Compares the dat files with zip romsets
Show games's config = Displays the current display settings
Show renderer config = Display output from ZiNc in a dialog box
Use game's config= If selected opens up ZiNc Config dialog for current game
Setup Controller = Allos u to setup the conroller of a currently selected game
Change Config = Opens up ZiNc Config dialog for current game
Save = Save current settings
Reset = Reset to last saved settings
Load = Load setting from default
Set default = Save current values as default


ROM Scanning:
------------------------------------------------------------
How my ROM's scanning works

ZiNcGui checks to see if .\zcfg\<romsetname>ZiNc.cfg exists
If it does it checks to see if "; Use Specific Config" is set to TRUE (1) 
If it's TRUE uses the "--roms-directory" form that cfg file 
if not the "--roms-directory" from .\zcfg\defualtZiNc.cfg is used

File and folder naming conventions
.\ZiNc.cfg and .\renderer.cfg not used (.\rzfg\defualt.cfg and .\zcfg\defaultZiNc.cfg insted)

Folders used by ZiNcGui
-----------------------------------------------------------------------------
.\rcfg contains renderer config files 
	<romsetname>.cfg -> renderer and some game settings information
.\zcfg contains game ZiNc
	<romsetname>zinc.cfg -> zinc.cfg file information for game
.\shots contains screen shots
	<romsetname>.jpg -> default shot
	\<romsetname>\*.bmp or *.gif or *.jpeg or *.jpg -> rollover shots
.\pcfg contains plugin configs
	<romsetname>cp.cfg -> controller settings information

Notes:
-----------------------------------------------------
ZiNcGui MUST be placed in the same folder as ZiNc!

winterblasts controller must be .\pcfg\controller.znc (this included in the zip)
If you have a problem use the show output button and check "Write Log on show Output" and have a look at the ZiNcGUIDebug.log file for the error

is the error messages is unknown switch to me --use-xxxx
 close ZiNc GUI
 Delete contents of zcfg
 Then restart ZiNc GUI
This is cause by the removal of some of the command line switches in the cfg files



